Upright Long-Ear Rabbit

The completed model, shown from another angle to help check its shape and proportions.

The completed model, shown from another angle to help check its shape and proportions.

1. 1

   Fold the square in half and reopen it. Bring the top and bottom edges to the center crease, then rotate the rectangle upright.

2. 2

   Fold all four corners inward and reopen them. Open one corner pocket along the crease and squash it upward into a triangle.

3. 3

   Repeat the pocket fold at the other three corners. Fold the triangular sections upward and downward as indicated to form the long layered shape.

4. 4

   Turn the model over and fold its upper and lower ends toward the middle. Turn it back over and bring the two lower sides to the center.

5. 5

   Fold the circled upper section down along the guide. Fold the small top tip down, fold it down once more, then fold the whole model in half to the left.

6. 6

   Rotate the model horizontally. Hold the head section and raise it slightly. Fold the rear part to the left along the diagonal guide and unfold to mark the crease.

7. 7

   Reverse the rear fold along the crease to form the body and base. Separate and shape the ears, then draw a small eye.

The completed model, shown from another angle to help check its shape and proportions.

The completed model, shown from another angle to help check its shape and proportions.

The completed model, shown from another angle to help check its shape and proportions.